Search Results

Displaying 390 results

  1. Vessel Lid and Safety Manifold (3 bar system)

    The Jacketed Vessel Lid and Safety Manifold for the 3 bar system is designed for use with the Jacketed Vessel Clamp for the Atlas 3 Bar System. The lid has 7 ports: 1 x vertical M30 centre port for the 3 bar Stirrer Seal and Guide 3 x GL18 ports […]

  2. Atlas Safety Enclosure (3 bar)

    The safety enclosures for the Atlas 3 Bar Pressure System offers a compact and safe shield when pressurizing vessels and facilitate easy access for changing vessels between experiments.  Essential for all 3 bar pressure systems.

  3. Atlas 200 Bar Gas Pressure Control Module

    This module automatically controls the dosing of gas into and out of the reactor to control the pressure within the reactor. There are 3 modes: Set Min. Pressure and Max. Pressure – In this mode the inlet valve is opened if the pressure drops below the Min. Pressure and opens […]

  4. Aalborg Mass Flow Controllers

    The Aalborg Mass Flow Controller is for use with Atlas Pressure Systems. It is ideal for applications such as dosing a controlled quantity of gas into a reactor at an accurate rate. Viewing data and programming is possible locally by the LCD and four button keypad or remotely by the […]

  5. Aalborg Mass Flow Meter

    The Aalborg Mass Flow Meters are for use with Atlas Pressure Systems. They are ideal for applications such as understanding the total mass of gas dosed into a reactor and gas uptake monitoring. Viewing data and programming is possible locally by the LCD and four button keypad or remotely by […]

  6. Atlas Gas Selection Module

    The Gas Selection Module allows 3 gases to be permanently connected to the module yet only one gas connected to the reactor at any one time. It can be controlled from the twist and click knob to select Gas 1, Gas 2, Gas 3, or None. Alternatively, it can be […]

  7. High Pressure Vessel and Lid (200 Bar)

    Syrris offer a range of High-Pressure Vessels for use with the High-Pressure Vessel Lids in the Atlas Sodium High-Pressure system. These Vessels are made of stainless steel or Hastelloy. This module is for the following Syrris products: Atlas Sodium 200 Bar Pressure System

  8. Dry Bath for High Pressure Vessel (200 Bar)

    The dry baths for high-pressure vessels fit onto the Hotplate or Hotter Hotplate and accept the stainless steel or Hastelloy high-pressure vessels.

  9. Atlas Hotter Hotplate (for Atlas Classic)

    The Atlas Hotter Hotplate for the Base Unit connects via a bayonet fitting and is automatically detected. The Atlas Hotplate includes a heater and an embedded RTD for feedback of plate temperature and a thermal cut-out for safe operation. The Atlas Hotplate can be controlled directly from the Base Unit […]

  10. Orb Base Unit

    The Orb Base Unit includes the support frame, adjustable height vessel clamp, motor mounting, drip tray, and hose clamps.

  11. Orb DN100 Clamp

    DN100 quick clamp for use with 100 mL to 2 L vessels.

  12. Orb DN150 Clamp

    DN150 quick clamp for use with vessels from 1 L up to 10 L in volume.